22
DVQX1834
(ENG)
Note
0
When carrying, the lens hood can be attached in the
reverse direction.
1
Remove the lens hood.
2
Align mark
B
(
) on the lens hood with the mark
on the tip of the lens.
3
Attach the lens hood by rotating it in the direction of
the arrow until it clicks.
0
It is recommended to remove the lens hood during
flash photography as the lens hood can block the light
from the flash.
0
To prevent dropping of the lens, you should never carry
the lens by just holding the lens hood.
∫
Notes on filter use
0
It is possible to attach the lens cap or the lens hood
with the filter already attached.
0
There may be some vignetting in recorded images if
multiple filters are attached simultaneously.
0
It is not possible to attach any items other than filters
such as a conversion lens or adaptor to the front of the
lens and use it in combination with this lens.
Lens damage may result if such items are attached.
Switching AF/MF
Switch AF/MF by sliding the
focus ring
A
forwards or
backwards (focus clutch
mechanism).
0
When the digital camera is
set to MF, the operation will
be MF irrespective of the
position of the focus ring.
0
Check the length indication
B
when using MF. Use it as a
guide for focusing.
AF
MF
1
0.28
0.33
0.4
0.5
m
1.2
1.5
0.7
2.5
1.5
5
feet
ĩ
H-X1025-DVQX1834.book 22 ページ ２０１９年６月１３日 木曜日 午後２時１１分
