DVQX1208 (ENG)
8
∫
Using external audio
devices
1
Set the LINE/MIC/
i
48V
switch (INPUT1, INPUT2)
to match the connected
device.
Set the switch to the match the device connected to the
XLR terminals (INPUT1, INPUT2).
• When set to [
i
48V], connecting a device that does not
support
i
48V power supply may cause damage to the
connected device. Check the device before
connecting.
• If noise from the unconnected terminal is bothering, set
the LINE/MIC/
i
48V switch to [LINE].
2
(When [MIC], [
i
48V] is
set) Set the input level
with the GAIN switch
(INPUT1, INPUT2).
When the LINE/MIC/
i
48V switch is set to [MIC] or
[
i
48V], the input gain can be changed with the GAIN
switch.
• If the LINE/MIC/
i
48V switch is set to [LINE], the input
gain cannot be changed.
3
Set the recording
channel with the CH1/2
switch.
• If using a stereo microphone with two XLR (3 pin)
plugs, connect the Lch to XLR terminal (INPUT1), and
the Rch to XLR terminal (INPUT2), and set the CH1/2
switch to [INPUT 1/2].
[LINE]
External audio devices (such as mixers).
[MIC]
Dynamic microphone or microphone with
built-in battery.
[
i
48V]
Microphone that supports
i
48V power
supply (phantom power supply).
[
i
20]
i
20 dB
[0]
0 dB
(Default setting, standard level:
j
40 dBu)
[
j
20]
j
20 dB
Settings
Audio recorded with CH1/CH2
[INPUT 1/1]
INPUT1
CH1
CH2
[INPUT 1/2]
INPUT1
CH1
INPUT2
CH2
DMW-XLR1PP&E&GK-DVQX1208ZA.book 8 ページ 2017年2月6日 月曜日 午後5時11分