17
VQT2A16
∫
Notes
≥
Be careful not to get the light shielding film dirty with fingerprints etc.
≥
Check one more time that the O-ring is fitted evenly into the O-ring groove.
≥
Avoid opening or closing the Case where there is a lot of sand or dust and in humid
or wet places.
≥
If there is a sudden change of humidity caused by moist air entering the Case,
condensation may appear inside the Case.
≥
To prevent condensation, set the digital camera in as dry a place as possible. Also,
check that the silica gel (supplied) is sufficiently dry before inserting.
≥
If sunscreen or sun oil sticks to the Case, wash it off immediately with lukewarm
water to prevent reduced waterproofness or discoloration.
≥
Submerge in fresh water for approximately 10 minutes after using the digital camera at
the beach or in water. Read the operating instructions for details.
≥
If there are any drops of water or dirt on the camera unit, wipe off using a dry cloth
before standing the unit upright on a dry cloth for a while and checking that the water has
been removed. After this, please attach the camera.
VQT2A16.book 17 ページ ２００９年１月２８日 水曜日 午後６時４２分
