- 79 -
Advanced (Recording pictures)
You can take pictures with connections suitable for creating panorama images.
∫
Setting the recording direction
1
Touch the direction to take picture.
• The horizontal/vertical guideline will be displayed.
2
Take the picture.
• You can retake the picture by selecting [RETAKE].
3
Touch [NEXT].
• You can also enter [NEXT] by pressing the shutter button halfway.
• Part of the recorded image is displayed as a transparent image.
4
Take picture after moving the camera horizontally
or vertically so the transparent image overlaps.
• When taking the third and later pictures, repeat steps
3
and
4
.
• You can retake the picture by selecting [RETAKE].
5
Touch [EXIT].
Note
• It will be a normal motion picture recording during the motion picture recording.
• The flash setting is fixed to [
Œ
].
• The focus, zoom, exposure, White Balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
• We recommend using a tripod. When it is dark, we recommend using the self-timer for taking
pictures.
• When the camera is set to [STABILIZER] and there is very little jitter, or if [STABILIZER] is set
to [OFF], shutter speed may slow down up to 8 seconds.
• The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal
processing. This is not a malfunction.
• The recorded images can be combined into panorama pictures using the software
“PHOTOfunSTUDIO 5.2 HD Edition” on the CD-ROM (supplied).
[PANORAMA ASSIST]
×
