Preparation
- 32 -
• Calibration is not done if correct position is not touched. Touch the [
i
] mark again.
• If you set a different language by mistake, select [
~
] from the menu icons to set the desired
language.
• The Stabilizer function is switched between [ON] and [OFF] every time [STABILIZER] is
touched during the [STABILIZER DEMO.].
• In Playback Mode, [STABILIZER DEMO.] cannot be displayed.
• [STABILIZER DEMO.] is an approximation.
• Touch [EXIT] to close [STABILIZER DEMO.].
• [AUTO DEMO] has no TV output capability even when it is in Playback Mode.
• Press [MENU] to close [AUTO DEMO].
[CALIBRATION]
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1
Touch [START].
2
Touch the orange [
r
] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
• A message is displayed once the
position is set.
3
Touch [END] to finish.
~
[LANGUAGE]
Set the language displayed on the screen.
[DEMO MODE]
Displays the amount of jitter the camera has detected.
([STABILIZER DEMO.])
The camera’s features are displayed as slide shows. ([AUTO
DEMO])
[STABILIZER DEMO.]
A
Amount of jitter
B
Amount of jitter after correction
[AUTO DEMO]:
[OFF]
[ON]
DEMO
A
B
