VQT2R48
141
Copying still pictures and motion pictures
Getting Ready:
• Charge the battery sufficiently. Or, connect the AC adaptor (optional) and DC coupler
(optional). (
14, 15)
• Insert card and set mode dial to any except
. When importing pictures from the built-
in memory, remove any memory cards.
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty operation.)
[ACCESS] (sending data)
• Do not disconnect the USB connection
cable while [ACCESS] is displayed.
USB connection cable
(always use cable supplied)
Turn on power of both
camera and computer
Connect camera to
computer
• Please make sure you use the
supplied USB connection cable.
Use of cables other than the
supplied USB connection cable
may cause malfunction.
Select [PC] on the camera
A message may be displayed on screen
if [USB MODE] (
26) is set to [PictBridge
(PTP)]. Select [CANCEL] to close the
screen, and set [USB MODE] to [PC].
Operate with your
computer
To cancel connection
Click
‘Safely Remove Hardware’
in the Windows System Tray
disconnect USB
connection cable
turn off camera power
disconnect AC adaptor
Some computers can read directly from the camera’s memory card.
For details, see the manual for your computer.
Example of DMC-TZ10/DMC-ZS7
