manualshive.com logo in svg

Panasonic Lumix DMC-TZ35EB, Руководство по обслуживанию

Поделиться
Скачать
Panasonic Lumix DMC-TZ35EB Скачать руководство пользователя страница 39

39

8.5.6.

Insert the Fix Frame Unit

1. Install the Drive Gear to the Fix Cam Frame Unit.
2. Align the   mark (Outside Cam Frame and Drive Frame 

and Fix Cam Frame), and install the Unit of Drive Frame 
Unit, Decorative Frame Unit, Outside Cam Frame, 1st 
Lens Frame Unit, 2nd Lens Frame Unite, 3rd Lens Frame 
Unit, Straight Frame and Both Side Cam Frame to the Fix 
Cam Frame Unit.
*Keep the toothpicks (rotation stopper ) inserted.

3. Remove the toothpicks (rotation stopper) and insert the 

Drive Gear.

8.5.7.

Insert the Master Flange Unit

Note: (When Installing)

Refer to "The Application of Grease Method" when installing 
the Master Flange Unit.
Take Care not to damage the flex.
Take Care not to tuck in to the Master Flange Unit, When 
inserting the Shutter Flex.

1. Turn the Drive Frame Unit to the Wide position as below.
2. Push the Hole of the Shutter Flex to the Boss of the 

Master Flange Unit tightly.

3. Place the Shutter Flex following the Guide of the Fix Cam 

Frame, and install the Master Flange Unit to the Unit of 
Fix Cam Frame Unite, Drive Frame Unit, Decorative 
Frame Unit, Outside Cam Frame, 1st Lens Frame Unit, 
2nd Lens Frame Unite, 3rd Lens Frame Unit, Straight 
Frame and Both Side Cam Frame.

4. Turn the Drive Frame Unit to the completely retracted 

position.

Содержание Lumix DMC-TZ35EB























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды