Panasonic Lumix DMC-TZ20EB Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 78

Panasonic Lumix DMC-TZ20EB Скачать руководство пользователя страница 7

7

2.4.

How to Replace the Lithium Battery

2.4.1.

Replacement Procedure

1. Remove the SD Card P.C.B. (Refer to Disassembly Procedures.)

2. Remove the Lithium battery (Ref. No.

at foil side of SD Card P.C.B.) and then replace it into new one.

Note:

The lithium battery is a critical component.
(Type No.: ML-421S/DN

Manufactured by Energy Company, Panasonic Corporation.

)

It must never be subjected to excessive heat or discharge.
It must therefore only be fitted in equipment designed specifically for its use.
Replacement batteries must be of the same type and manufacture.
They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposed of in waste products destined for burial rather than incineration.

«
...
5
6
7
8
9
...
»

Содержание Lumix DMC-TZ20EB















































































Отзывы:

Нет отзывов