Panasonic Lumix DMC-TS5D Скачать руководство пользователя страница 197

Страница: 197 / 277

- 197 -

Wi-Fi

Press [Wi-Fi].

Press

to select [New Connection], and

then press [MENU/SET].

•

When connecting with the setting you used before, you can select the connection destination
from [History Connection]

(P179)

or [Favorite Connection]

(P180)

Press

to select [Send Images While Recording], and then press [MENU/SET].

Press

to select [AV device], and then press [MENU/SET].

Press

to select [Home] or [External], and then press [MENU/SET].

Press

to select connection method, and then press [MENU/SET].

Press

to select a device you want to connect, and then press [MENU/SET].

•

When the connection is complete, the screen is displayed. To change the send setting, press
[DISP.].

(P192)

Take pictures.

•

To change the setting or disconnect, press [Wi-Fi].

(P189)

You cannot change the settings while sending pictures. Wait until sending is complete.

When sending images to AV device

Preparations:

When sending a picture to [Home], set your device to DLNA waiting mode.
•

Read the operating instructions of your device for details.

When sending images to [External], the following are required:
•

Registration to “LUMIX CLUB”.

(P206)

•

Address number and access number acquired by the destination External AV device.

(P210)

[Via Network]

When you want to connect to an AV device via a wireless access point.

(P185)

[Direct]

•

This can be
selected only
when [Home]
is selected.

When you want to directly connect an AV device to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection].

(P187)

Содержание Lumix DMC-TS5D






















































































































































































































































































Результаты поиска

Содержание Lumix DMC-TS5D

Отзывы:

Panasonic Lumix DMC-TS5D, Руководство пользователя, Страница: 197 / 277

Результаты поиска

Содержание Lumix DMC-TS5D

Отзывы: