- 71 -
Recording
Entering Text
It is possible to enter babies’ and pets’ names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
1
Display the entry screen.
•
You can display the entry screen via the following operations.
–
[Name] of [Baby1]/[Baby2] or [Pet] in Scene Mode
–
[Location] in [Travel Date]
–
[Access Point], [LUMIX CLUB], [Device Name], [External AV device], [Wi-Fi Password] in
the [Wi-Fi Setup] menu.
2
Press
3
/
4
/
2
/
1
to select text and then press [MENU/
SET] to register.
•
Move the cursor to [
] and then press [MENU/SET] to switch text
between [A] (capitals), [a] (lower case), [1] (numbers) and [&] (special
characters).
•
To enter the same character again, rotate the zoom lever towards [
Z
] (T) to move the cursor.
•
The following operations can be performed by moving the cursor to the item and pressing
[MENU/SET]:
–
[
]
]: Enter a blank
–
[Delete]: Delete a character
–
[ ]: Move the entry position cursor to the left
–
[ ]: Move the entry position cursor to the right
•
The following characters and numbers can be entered.
–
A maximum of 30 characters can be entered.
¢
A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ].
3
Press
3
/
4
/
2
/
1
to move the cursor to [Set] and then press
[MENU/SET] to end text input.
Note
•
Text can be scrolled if all of the entered text does not fit on the screen.
•
It is displayed in order of [Location], [Name].