Panasonic Lumix DMC-LZ7EB, Руководство по обслуживанию

Страница: 2 / 47

2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precaution ------------------------------------------------- 3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.) --------3
1.4. How to Discharge the Capacitor on Flash Top
PCB------------------------------------------------------------4
2 Warning -------------------------------------------------------------- 5
2.1. Prevention of Electro Static Discharge (ESD)
to ElectrostaticallySensitive (ES) Devices -----------5
2.2. How to Replace the Lithium Battery -------------------6
3 Service Navigation ------------------------------------------------ 7
3.1. Introduction --------------------------------------------------7
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------7
3.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) ------------------------------------------7
3.4. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------8
4 Specifications ---------------------------------------------------- 11
5 Location of Controls and Components ------------------ 12
6 Service Mode ----------------------------------------------------- 13
6.1. Error Code Memory Function ------------------------- 13
6.2. Confirmation of Firmware Version ------------------- 16
7 Service Fixture & Tools --------------------------------------- 17
7.1. Service Fixture and Tools ------------------------------ 17
7.2. When Replacing the Main PCB ---------------------- 18
7.3. Service Position ------------------------------------------ 18
8 Disassembly and Assembly Instructions --------------- 19
8.1. Disassembly Flow Chart-------------------------------- 19
8.2. PCB Location---------------------------------------------- 19
8.3. Disassembly Procedure -------------------------------- 20
8.4. Disassembly Procedure for the Lens --------------- 24
8.5. Assembly Procedure for the Lens ------------------- 26
8.6. Removal of the CCD Unit ------------------------------ 27
9 Measurements and Adjustments -------------------------- 28
9.1. Matrix Chart for Replaced Part and Necessary
Adjustment ------------------------------------------------- 28
10 Maintenace -------------------------------------------------------- 29
10.1. Cleaning Lens and LCD Panel ----------------------- 29