141
SQW0021
Shutter and Drive Settings
Selecting a Drive Mode
Recording mode:
You can switch the operation to be performed when you press the shutter button.
1
Press [
] button ( )
2
Press to select the drive mode and
press [MENU/SET]
Drive Mode
[Single]
When the shutter button is pressed, only one picture is recorded.
[Burst]
The pictures are recorded in succession while the shutter button is
pressed.
[Auto Bracket]
*
Each time the shutter button is pressed, the pictures are
recorded with different exposure settings based on the Exposure
Compensation range.
[Aspect Bracket]
*
When the shutter button is pressed, 4 pictures with 4 different aspect
ratios are automatically recorded.
[Self Timer]
When the shutter button is pressed, recording takes place after the
set time has elapsed.
[Panorama
Shot]
*
The pictures are recorded in succession while you press the shutter
button and move the camera horizontally or vertically, and then the
camera combines the pictures into a single panorama picture.
*
Cannot be set when using [Intelligent Auto] Mode.
•To cancel drive mode, select [ ] ([Single]) or [
]. The recording is switched to
“Single”.
•When you press , you can change the settings of each drive mode. Note,
however, that you cannot change the settings of [Single] and [Aspect Bracket].
