89
VQT1C84
Connecting to other equipment
• [PAGE LAYOUT]
(Possible layouts on the camera)
F
Settings on the printer are
prioritised.
G
1 page with no frame print
H
1 page with frame print
I
2 pages print
J
4 pages print
• An item cannot be selected if the
printer does not support the page
layout.
■
Layout printing
• When printing a picture several times
on 1 sheet of paper
For example, if you want to print a picture
4 times on 1 sheet of paper, set [PAGE
LAYOUT] to [
J
] and then set the
number of prints to 4 for the picture on
[NUM. OF PRINTS].
• When printing different pictures on 1
sheet of paper
For example, if you want to print 4
different pictures on 1 sheet of paper,
set [PAGE LAYOUT] to 4-picture printing
[
J
] and then set [NUM. OF PRINTS]
for the pictures to 1.
• Do not disconnect the USB connection
cable when the cable disconnection
warning icon [
K
] is indicated.
(Depending on the printer, the icon may
not be displayed.)
• If the remaining battery power becomes
low while the camera and the printer are
connected, the status indicator blinks
and the alarm beeps. If this happens
during printing, press [MENU/SET] and
stop printing at once. If not printing,
disconnect the USB connection cable.
• The camera is receiving an error
message from the printer when the [
*
]
indication lights orange during printing.
After fi nishing printing, make sure there
are no problems with the printer.
• If the total number of ordered prints or
the number of pictures set for print is
large, printing is performed at intervals.
In such cases, the number of remaining
prints shown on the display will differ
from the number of prints you set. The
discrepancy, however, does not indicate
an error.
• Date print function on the printer may
have priority over the same settings on
the camera. Check the setting on the
printer as well.
• When the mode dial is set to a choice
other than print mode [
], [USB MODE
CHANGED. PLEASE REMOVE THE
USB CABLE.] appears on the camera’s
LCD monitor. Set the mode dial back
to [
] before disconnecting the USB
connection cable. Disconnect the USB
connection cable after cancelling printing.
• When you want to print pictures with
date, the [DATE STAMP] function (P74)
is also useful.
Note that if you use date
stamp and then specify printing the
date when you order prints or on a
printer, both dates will be printed and
may overlap.
Содержание LUMIX DMC-LS70
Страница 109: ...109 VQT1C84 Others MEMO ...
Страница 110: ...110 VQT1C84 Others MEMO ...
Страница 111: ...111 VQT1C84 Others ...
