manualshive.com logo in svg

Panasonic Lumix DMC-LS60EB, Руководство по обслуживанию, Страница: 25 / 51

Поделиться
Скачать
Panasonic Lumix DMC-LS60EB Скачать руководство пользователя страница 25

25

8.4.

Disassembly Procedure for the
Lens

NOTE: When Disassembling and Assembling for the Lens

1. To minimize the possibility of the CCD being dirt, perform

disassemble and/or assemble under the condition of the
CCD is being mounted. 
Disassembling procedures for the CCD unit, refer to item
8.6.

2. Take care that the dust and dirt are not entered into the

lens.
In case of the dust is putted on the lens, blow off them by
airbrush.

3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease to the point where is shown to" Grease

apply" in the figure.

8.4.1.

Removal of the Zoom Motor Unit,
Direct Frame/Drive Frame Unit and
1st Lens Frame/2nd Lens Frame
Unit

1. Remove the 2 locks.
2. Unscrew the 5 screws (A).
3. Turn the zoom motor unit to the indicated by arrow.
4. Remove the cover to the indicated by arrow.
5. Move the master frange unit to the indicated by arrow.

Содержание Lumix DMC-LS60EB




















































Отзывы:

Нет отзывов