Panasonic Lumix DMC-LC1 Скачать руководство пользователя страница 111

Страница: 111 / 140

Others

111

After Use

After using the camera, it is recommended that you complete the following steps:

Turn the camera off and close the
flash.

Remove the card and the battery.
(P13, P17)

Remove the hood cap and the
lens hood (if using it) and then
attach the lens cap.

• When removing the lens hood,

push the knob on the lens hood
and then slide it to the front.

Suggestions/Tips

• If you will not be using the camera for

a long time,
–Remove the battery. (When you

insert the battery again, set the
clock.)

– Do not keep the camera in a place

where it will be subjected to high
temperatures, high humidity or soot.
Fungus may be attached to the lens
and the camera or condensation
may occur.

– Keep the camera in a cool, dry and

well-ventilated place and avoid
storing near dust or chemicals.

– We recommend keeping it in a

closed case with the desiccant.

OFF

LC1PP.book 111 ページ２００４年１月２６日　月曜日　午後６時５０分

Содержание Lumix DMC-LC1













































































































































Результаты поиска

Содержание Lumix DMC-LC1

Отзывы:

Panasonic Lumix DMC-LC1, Руководство по эксплуатации, Страница: 111 / 140

Результаты поиска

Содержание Lumix DMC-LC1

Отзывы: