17
Preparation/Basic
(ENG) SQT0834
Basic Operations
You can adjust the angle of the monitor.
• Be careful not to catch your finger, etc. in the monitor.
• When rotating the monitor, be careful not to apply too much force.
This may cause scratches and malfunctions.
• When not using this unit, close the monitor completely back to the
original position.
The shutter button works in two steps. To take a picture, press it.
Press the shutter button halfway to focus.
A
Aperture value
B
Shutter speed
C
Focus indication
• Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not achieved, except
when set to flash.)
• Once the subject is in focus, the focus indication is displayed.
(When the subject is not in focus, the indication flashes)
Press the shutter button fully (push it in further),
and take the picture.
• When the image is correctly focused, the picture will be taken, since the [Focus/Release
Priority] is set initially to [FOCUS].
• The focus range is different depending on the lens used.
• Even during menu operation or image playback, if you press the shutter button halfway, you
can instantly set the camera ready for recording.
Monitor
Shutter button (Taking pictures)
60
60
60
3.5
3.5
3.5
C
A B
DMC-GF7W-SQT0834_eng.book 17 ページ ２０１５年１月１３日 火曜日 午前１０時３９分
