Panasonic Lumix DMC-GF2 Скачать руководство пользователя страница 144 | Manualshive

Страница: 144 / 218

Panasonic Lumix DMC-GF2 Скачать руководство пользователя страница 144

Recording

- 144 -

• If you set [OFF], be careful as the picture may not be properly focused even if [AFS] or [AFC] in

[FOCUS MODE] is set.

• This does not operate during motion picture recording.

• The effective range of the AF Assist Lamp is different depending on used lens.

– When the interchangeable lens (H-H014) is attached: Approx. 1.0 m (3.28 feet) to 3.5 m

(11.5 feet)

– When the interchangeable lens (H-FS014042) is attached and at Wide: Approx. 1.0 m

(3.28 feet) to 3.0 m (9.84 feet)

• The AF Assist Lamp is valid only for the subject in the centre of the screen. Use it by

positioning the subject in the centre of the screen.

• Remove the lens hood.

• When you do not want to use the AF Assist Lamp (e.g. when taking pictures of animals in dark

places), set the [AF ASSIST LAMP] to [OFF]. In this case, it will become more difficult to focus

on the subject.

• The AF Assist Lamp gets slightly blocked when the interchangeable lens (H-FS014042) is

used, but it does not affect the performance.

• The AF Assist Lamp may be greatly blocked, and it may become harder to focus when a lens

with large diameter is used.

• The setting for the [AF ASSIST LAMP] is fixed to [OFF] in [SCENERY], [ARCHITECTURE],

[NIGHT SCENERY] and [SUNSET] in Scene Mode.

[FOCUS PRIORITY]

It will set so no picture can be taken when it is out of focus.

[OFF]:

This gives priority to the best time to take a picture so
you can take a picture when the shutter button is
pressed fully.

[ON]:

You cannot take a picture until the subject is brought
into focus.

[AF ASSIST LAMP]

Illuminating the subject makes it easier for the camera to focus
when recording in low light conditions that make focusing difficult.

[OFF]:

The AF Assist Lamp does not turn on.

[ON]:

When taking pictures in dark places, the AF Assist
Lamp lights while the shutter button is pressed
halfway. (Larger AF areas are displayed depending on
the recording conditions.)

[AF+MF]

It is possible to adjust focus manually after it was adjusted
automatically.

[OFF]
[ON]:

It is possible to finely adjust the focus manually by
rotating the focus ring while AF lock ([FOCUS MODE]
is set to [AFS] and shutter button is half-way pressed,
or AF lock with [AF/AE LOCK]).

«
...
142
143
144
145
146
...
»

Содержание Lumix DMC-GF2



























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды