Playback/Editing
- 162 -
You can set protection for pictures you do not want to be deleted by mistake.
1
Select [PROTECT] on the [PLAYBACK] Mode menu.
2
Press
3
/
4
to select [SINGLE] or [MULTI] and then press [MENU/SET].
• Collective editing in a group unit is possible by selecting a picture with burst icon [
˜
].
For [SINGLE IN BURST GROUP] and [MULTI IN BURST GROUP], refer to
.
∫
Cancelling all the [PROTECT] settings
1
Select [PROTECT] on the [PLAYBACK] Mode menu.
2
Press
3
/
4
to select [CANCEL] and then press [MENU/SET].
• Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
• The [PROTECT] feature is only designed to work with this camera.
• Even if you protect pictures on a card, they will be deleted if the card is formatted.
• Even if you do not protect pictures on a card, they cannot be deleted when the card’s
Write-Protect switch is set to [LOCK].
[PROTECT]
3
Select the picture, and then press
[MENU/SET].
When [MULTI] has been selected
• Repeat these steps for each picture.
• The settings are cancelled when
[MENU/SET] is pressed again.
• Exit the menu after it is set.
[SINGLE]
[MULTI]
Press
2
/
1
to select
the picture.
Press
3
/
4
/
2
/
1
to
select the pictures.
