VQT3N48 (ENG)
16
Attaching/Detaching the Lens
•
Check that the camera is turned off.
•
Change lenses where there is not a lot of dirt or dust.
•
When using the interchangeable lens (H-PS14042), the lens barrel will not retract until the
power switch is turned [OFF]. Change the lens only after turning the power switch [OFF] and
checking that the lens barrel has retracted. (Do not push in the lens barrel with your fingers.
Doing so may damage the lens.)
Turn the lens rear cap
A
and the body cap
B
in the direction of the
arrow to detach them.
•
Do not put your hands inside the mount.
Align the lens fitting marks
C
(red
marks) on the camera body and the lens
and then rotate the lens in the direction
of the arrow until it clicks.
•
Do not press the lens release button
D
when you
attach a lens.
•
Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
Detach the lens cap.
Attaching a lens to the camera body
DMC-G3K&G3W&G3EB-VQT3N48_eng.book 16 ページ ２０１２年２月１５日 水曜日 午前１１時５１分
