VQT2S81
102
Advanced (Recording pictures)
∫
About the flicker reduction function
If there is marked flicker or striping when recording motion pictures, the Flicker Reduction
Function can be set to [ON].
1
Press [
‚
].
• The Flicker Reduction Function will be forcefully activated, and the shutter speed will be
adjusted to 1/120.
2
Rotate the rear dial.
• It is possible to select the shutter speed to adjust from 1/50, 1/60, 1/100, or 1/120, and
adjust to the optimal setting while viewing the screen.
• When Intelligent Auto Mode is selected in step
1
, motion picture recording matching to the
subject or recording situation can be performed.
∫
Scene detection
When the camera identifies the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its colour changes to the usual red.
• [
¦
] is set if none of the scenes are applicable, and the standard settings are set.
• When [
] is selected, the camera automatically detects a person’s face, and it will adjust the
focus and exposure.
(Face Detection)
(P70)
Note
• Refer to P41 for settings in Intelligent Auto Mode.
• Due to conditions such as the ones below, a different scene may be identified for the same
subject.
– Subject conditions: When the face is bright or dark, The size of the subject, The colour of the
subject, The distance to the subject, The contrast of the subject, When the subject is moving
– Recording conditions: Sunset, Sunrise, Under low brightness conditions, When the camera is
shaken, When zoom is used
Press the shutter button fully to stop recording.
• Sound will be heard when pressing the shutter button fully indicating start/stop of motion
picture recording.
Sound volume can be set in [BEEP] (P31).
• If the card becomes full in the middle of recording, the camera stops recording
automatically.
When set to Intelligent Auto Mode
¦
>
[i-PORTRAIT]
[i-SCENERY]
[i-LOW LIGHT]
[i-MACRO]
DMC-G10K&G10WGN-VQT2S81_eng.book 102 ページ ２０１０年４月２３日 金曜日 午後８時２５分
