Panasonic Lumix DMC-FZ7EB Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 54

Panasonic Lumix DMC-FZ7EB Скачать руководство пользователя страница 47

S5. Replacement Parts List

S-15

E.S.D. standards for Electrostatically Sensitive Devices, refer to “PREVENTION OF
ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES”
section.
Definition of Parts supplier:

1.

Parts marked with [MBI] in the remarks column are supplied from

“Matsushita Battery Industrial Co., Ltd.”

2.

Parts marked with [PAVC-CSG] in the remarks column are supplied from
PAVC COMPANY CS Group (PAVC-CSG).
Others are supplied from “Panasonic Shikoku Electronics Co., Ltd." (PSEC-SAIJO).

1.* Be sure to make your orders of replacement parts according to this list.
2. IMPORTANT SAFETY NOTICE
  Components identified with the mark have the special characteristics for safety.
  When replacing any of these components, use only the same type.
3. Unless otherwise specified,
  All resistors are in OHMS, K=1,000 OHMS. All capacitors are in MICRO-FARADS (uf), P=uuF.
4. The marking (RTL) indicates the retention time is limited for this item. After the discontinuation

of this assembly in production, it will no longer be available.

Note:

«
...
45
46
47
48
49
...
»

Содержание Lumix DMC-FZ7EB























































Отзывы:

Нет отзывов