Preparation
20
Attaching the Lens Hood
In bright sunlight or backlight, the lens hood
will minimize lens flare and ghosting.
The lens hood cuts out excess light and
improves the picture quality.
• Check that the camera is turned off and
that the lens is retracted.
• Close the flash.
1
1
Counter-rotate the 2 halves of
the lens hood adaptor until
marker
A
is at [UNLOCK]
position.
2
Place the camera upside down.
Align [UNLOCK] to groove
B
on the camera then slide the
lens hood adaptor over the
lens until it stops.
2
Rotate ring
C
clockwise until
[LOCK] mark is aligned with
marker
A
on the adaptor.
• Rotate the ring until it clicks.
3
1
Place the camera right way up.
Align marker
D
on the lens
hood to marker
E
on the
adaptor and push the lens
hood onto the adaptor.
2
Rotate the lens hood clockwise
until it stops at marker
F
.
[UNLOCK]
[LOCK]
EB-BODY.fm 20 ページ 2004年7月12日 月曜日 午後4時48分
Содержание LUMIX DMC-FZ3EB
Страница 114: ...114 MEMO ...
Страница 115: ...115 MEMO ...
Страница 116: ...Matsushita Electric Industrial Co Ltd Web Site http www panasonic co jp global B VQT0M07 C F0704Ua0 00500A ...