Panasonic LUMIX DMC-FZ2B Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 108

Panasonic LUMIX DMC-FZ2B Скачать руководство пользователя страница 65

Recording images (advanced)

65

Using the MC Protector/ND Filter

The MC protector (DMW-LMC55; optional)
neither affects the colours nor the amount of
light, so it can always be left attached to
protect the Digital Camera’s lens.
The ND filter (DMW-LND55; optional)
reduces the amount of light to approximately
1/8th without affecting the colour balance.

[Preparation]
• Check that the camera switch is set to [OFF]

and the lens barrel is fully retracted.

• Close the flash. (P39)

1

Remove the lens ring.

2

Attach the lens hood adapter

1

.

3

Install the MC protector

2

or the ND

filter

3

.

• The lens hood

4

and lens cap

5

can be

attached when installing the MC protector or
ND filter.

• When taking pictures with the flash using

the MC protector/ND filter, the vignetting
effect may occur.

• Do not use the conversion lens.

If it is used with the supplied lens hood
adapter, it may break.

3

2

1

FZ2‑B.book 65 ページ２００３年７月２２日火曜日午後１時４６分

«
...
63
64
65
66
67
...
»

Содержание LUMIX DMC-FZ2B













































































































Отзывы:

Нет отзывов