Panasonic LUMIX DMC-FZ18 Скачать руководство пользователя страница 10

Страница: 10 / 173

Preparation

- 10 -

Attaching the Lens Cap/
Strap

∫

Lens Cap (supplied)

Pass the string through the hole on
the lens cap.

Pass the same string through the
hole on the camera.

Attach the lens cap.

• When you turn the camera off, carry the

camera or play back the pictures, attach the
lens cap to protect the surface of the lens.

• Detach the lens cap before turning on the

camera in the recording mode.

• Be careful not to lose the lens cap.

∫

Strap (supplied)

Pass the strap through the hole at
the strap eyelet.

Pass the strap through the stopper
and fasten the strap.

: Pull the strap 2 cm or more.

• Attach the strap to the other side of the

camera being careful not to twist it.

• Check that the strap is firmly attached to the

camera.

• Attach the strap so that the “L

UMIX

” LOGO is

on the outside.

• We recommend attaching the strap when

using the camera to prevent it from dropping.

Содержание LUMIX DMC-FZ18














































































































































































Результаты поиска

Содержание LUMIX DMC-FZ18

Отзывы:

Panasonic LUMIX DMC-FZ18, Руководство по эксплуатации, Страница: 10 / 173

Результаты поиска

Содержание LUMIX DMC-FZ18

Отзывы: