Advanced (Recording pictures)
- 108 -
∫
Setting the White Balance manually
Set the White Balance value. Use to match the condition when taking photographs.
1
Select [
], and then touch [
].
2
Aim the camera at a sheet of white paper etc., so
that the frame in the center is filled by the white
object only and then touch [SET].
•
If the subject is overly bright or overly dark, you may
not be able to set the white balance. If this is the case,
adjust to an appropriate brightness and then set the
white balance again.
∫
Finely adjusting the White Balance
You can finely adjust the White Balance when you cannot acquire the desired hue by
setting the White Balance.
1
Select [
]/[
]/[
]/[
]/[
] from the White
Balance, and touch [
].
2
Touch the slide bar to make fine adjustments.
•
Select [0] to return to the original White Balance.
3
Touch [SET].
4
Touch [SET] to return to the menu screen.
•
Touch [EXIT] to close the menu.
Note
•
The White Balance icon on the screen turns red or blue.
•
You can finely adjust the White Balance independently for each White Balance item.
•
The White Balance fine adjustment setting is reflected in the picture when using the flash.
•
The White Balance fine adjustment setting is memorized even if the camera is turned off.
•
The White Balance fine adjustment level in [
] returns to [0] when you reset the White
Balance using [
].
•
White Balance fine adjustment cannot be set for [B/W], [SEPIA], [COOL] and [WARM] in
[COLOR MODE].
•
You can also press the shutter button halfway to close the menu.
[RED]:
Touch when the hue is bluish.
[BLUE]:
Touch when the hue is reddish.
SET
SET