Panasonic Lumix DMC-FX40EB, Руководство по обслуживанию

Страница: 2 / 53

2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precaution
-------------------------------------------------
3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.) --------3
1.4. How to Discharge the Capacitor on Flash Top
PCB------------------------------------------------------------4
2 Warning
--------------------------------------------------------------
5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord(For EB/GC/GH) -----------------6
2.4. How to Replace the Lithium Battery -------------------7
3 Service Navigation
------------------------------------------------
8
3.1. Introduction --------------------------------------------------8
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------8
3.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) ------------------------------------------8
3.4. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------9
4 Specifications
----------------------------------------------------
13
5 Location of Controls and Components
------------------
14
6 Service Mode
-----------------------------------------------------
16
6.1. Error Code Memory Function ------------------------- 16
6.2. ICS (Indication of additional Camera Settings
when picture was taken) function -------------------- 18
7 Service Fixture & Tools
---------------------------------------
20
7.1. Service Fixture and Tools ------------------------------ 20
7.2. When Replacing the Main PCB ---------------------- 21
7.3. Service Position ------------------------------------------ 21
8 Disassembly and Assembly Instructions
---------------
22
8.1. Disassembly Flow Chart-------------------------------- 22
8.2. PCB Location---------------------------------------------- 22
8.3. Disassembly Procedure -------------------------------- 23
8.4. Disassembly Procedure for the Lens --------------- 28
8.5. Assembly Procedure for the Lens ------------------- 30
8.6. Removal of the CCD Unit ------------------------------ 32
8.7. Removal of the Focus Motor Unit -------------------- 33
8.8. The Applyment of Grease Method ------------------- 33
9 Measurements and Adjustments
--------------------------
34
9.1. Matrix Chart for Replaced Part and Necessary
Adjustment ------------------------------------------------- 34
10 Maintenace
--------------------------------------------------------
35
10.1. Cleaning Lens and LCD Panel ----------------------- 35