Preparation
13
VQT1F66
Inserting and
Removing the Card
(optional)/the Battery
• Check that this unit is turned off.
• Prepare a card. (optional)
•
You can record or play back pictures
on the built-in memory when you are
not using a card.
1
Slide the release lever in the
direction of the arrow and open
the card/battery door.
•
Always use genuine Panasonic
batteries (CGA-S005E).
•
If you use other batteries, we cannot
guarantee the quality of this product.
2
Battery:
Insert it fully being careful about
the direction you insert it.
Pull the lever
A
in the direction of
the arrow to remove the battery.
Card:
Push it fully until it clicks being
careful about the direction you
insert it.
To remove the card, push the card
until it clicks, then pull the card
out upright.
B
: Do not touch the connection terminals
of the card.
• The card may be damaged if it is not
fully inserted.
3
1
:
Close the card/battery door.
2
:
Slide the release lever in the
direction of the arrow.
• If the card/battery door cannot be
completely closed, remove the card,
check its direction and then insert it
again.
• Remove the battery after use. Store the
removed battery in the battery carrying
case (supplied).
•
Do not remove the battery until the
LCD monitor and the status indicator
(green) turn off as the settings on the
camera may not be stored properly.
•
The supplied battery is designed only
for the camera. Do not use it with any
other equipment.
•
Do not insert or remove the battery or
the card while this unit is turned on.
The data on the built-in memory or the
card may be damaged. Be particularly
careful while the built-in memory or the
card is being accessed.
(P22)
•
We recommend using a Panasonic
card.
B
A
DMC-FX100ENG.book 13 ページ ２００７年５月１１日 金曜日 午前１１時３７分