- 139 -
Others
[Memory Card Error]/[Memory card parameter error]/[This memory card cannot be
used]
>
Use a card compatible with this unit.
(P22)
–
SD Memory Card (8 MB to 2 GB)
–
SDHC Memory Card (4 GB to 32 GB)
–
SDXC Memory Card (48 GB, 64 GB)
[Insert SD card again]/[Try another card]
•
An error has occurred accessing the card.
>
Insert the card again.
>
Insert a different card.
[Read Error/Write Error
Please check the card]
•
It has failed to read or write data.
>
Remove the card after turning the power off. Insert the card again, turn the power on, and
try to read or write the data again.
•
The card may be broken.
>
Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
•
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.
•
In the event that it stops even after using a “Class 4” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format
(P52)
.
•
Depending on the type of the card, motion picture recording may stop in the middle.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
>
Format the card after saving necessary data on a PC etc.
(P52)
>
Insert a different card.
[A folder cannot be created]
•
A folder cannot be created because there are no remaining folder numbers that can be used.
>
Format the card after saving necessary data on a PC etc.
(P52)
If you execute [No.Reset]
in the [Setup] menu after formatting, the folder number is reset to 100.
(P50)
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
•
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect.
(P51)
•
This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer.
(P120
,
123)
[This battery cannot be used]
•
Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Centre.
•
If the battery terminal is dirty, clean it and remove any objects.
[To prevent water leakage, ensure that the door is locked properly.]
•
Refer to
P20
for details.