Others
- 136 -
• Is the [REC]/[PLAYBACK] selector switch at the [
!
] setting?
(P30)
• Is there any memory remaining on the built-in memory or the card?
>
Delete the pictures which are not necessary to increase the available memory.
(P44)
• The picture can become whitish if there is dirt e.g. fingerprints on the lens.
>
If the lens is dirty, turn on the camera, eject the lens barrel
(P8)
and gently wipe the lens
surface with a soft dry cloth.
• Was this picture taken with the flash at the close range when the zoom is near [W] (1
k
)?
>
Zoom in a little, and then take the pictures.
(P39)
>
Check that the exposure is correctly compensated.
(P56)
>
Set auto bracket
(P57)
, [HI-SPEED BURST]
(P67)
, [FLASH BURST]
(P68)
in scene mode
or [BURST]
(P90)
of the [REC] mode menu to [OFF].
• The focus range varies depending on the recording mode.
>
Set to the proper mode for the distance to the subject.
• The subject is beyond the focus range of the camera.
(P36)
• There is camera shake (jitter) or the subject is moving slightly.
(P38)
>
The shutter speed becomes slower when pictures are taken in dark places so hold the
camera firmly with both hands to take the pictures.
(P33)
>
When taking pictures at a slow shutter speed, use the self-timer.
(P55)
Recording
The picture cannot be recorded.
The recorded picture is whitish.
The area around where the pictures were taken becomes dark.
The recorded picture is too bright or dark.
2 or 3 pictures are taken at one time.
The subject is not focused properly.
The recorded picture is blurred. The optical image stabilizer is not effective.