
VQT2P49
37
Available types in each mode
(: Available, —: Not available,
: Default setting)
[SCENE MODE]
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Set to
(Auto),
(Auto/red-eye reduction),
(Slow sync./red-eye reduction) or
(Slow sync ) according to the subject and brightness.
• The flash cannot be used in Motion Picture Mode and in these Scene Modes:
,
,
,
,
,
and
.
Focus range according to ISO sensitivity and zoom
Focus range
Max. W
Max. T
[SENSITIVITY]
(57)
[
]
Approx. 0.3 m - 4.9 m
(0.99 feet - 16.08 feet)
Approx. 0.5 m - 2.9 m
(1.64 feet - 9.51 feet)
ISO80
Approx. 0.3 m - 1.0 m
(0.99 feet - 3.28 feet)
Approx. 0.5 m - 0.6 m
(1.64 feet - 1.97 feet)
ISO100
Approx. 0.3 m - 1.2 m
(0.99 feet - 3.94 feet)
Approx. 0.5 m - 0.7 m
(1.64 feet - 2.29 feet)
ISO200
Approx. 0.4 m - 1.7 m
(1.32 feet - 5.58 feet)
Approx. 0.5 m - 1.0 m
(1.64 feet - 3.28 feet)
ISO400
Approx. 0.6 m - 2.4 m
(1.97 feet - 7.87 feet)
Approx. 0.6 m - 1.4 m
(1.97 feet - 4.59 feet)
ISO800
Approx. 0.8 m - 3.4 m
(2.62 feet - 11.2 feet)
Approx. 0.6 m - 2.0 m
(1.97 feet - 6.56 feet)
ISO1600
Approx. 1.15 m - 4.9 m
(3.77 feet - 16.08 feet)
Approx. 0.9 m - 2.9 m
(2.96 feet - 9.51 feet)
[HIGH SENS.] in
[SCENE MODE] (47)
ISO1600-
ISO6400
Approx. 1.15 m - 9.8 m
(3.77 feet - 32.15 feet)
Approx. 0.9 m - 5.8 m
(2.96 feet - 19.03 feet)
[FLASH BURST] in
[SCENE MODE] (48)
ISO100-
ISO3200
Approx. 0.3 m - 3.2 m
(0.99 feet - 10.50 feet)
Approx. 0.5 m - 1.9 m
(1.64 feet - 6.23 feet)
Do not touch or look at the flash (7) from close distances (i.e. a few cm).
Do not use the flash at close distances to other subjects (heat/light may damage subject).
Flash settings may be changed when changing Recording Mode.
When [
] is set in [SENSITIVITY], the ISO sensitivity is automatically set in a
range up to 1600.
Scene Mode flash settings are restored to default when Scene Mode is changed.
If flash is to be emitted, flash type marks (e.g.
) will turn red when shutter button is
pressed halfway.
No pictures may be taken if these marks (e.g.
) are flashing (flash is charging).
Insufficient flash reach may be due to inadequately set exposure or White Balance.
Flash effect may not be fully achieved with high shutter speeds.
Flash charging may take time if battery is low, or if using flash repeatedly.
Содержание Lumix DMC-FP3
Страница 138: ......