
154
Stabiliser, Zoom and Flash
Correcting jitter
●
The Image Stabiliser may produce operational sound or cause vibration during its
operation, but these are not malfunctions.
●
When you use a tripod, we recommend setting [Operation Mode] to [OFF].
●
[Stabilizer] cannot be used by selecting [ ] (Normal) in Panorama Shot Mode.
●
In the following cases, the [Stabilizer] will switch to [ ] (Normal), even if it is set to [ ]
(Panning):
•During motion picture recording
•When recording 4K photos
•When recording using [Post Focus]
●
Cases where the stabiliser function may be ineffective:
•When there is a lot of jitter
•When the zoom magnification is high (also in the Digital Zoom range)
•When taking pictures while following a moving subject
•When the shutter speed becomes slower to take pictures indoors or in dark places
●
The panning effect by selecting [ ] is not fully achieved in the following cases:
•Bright summer days or other bright locations
•When the shutter speed is higher than 1/100 seconds
•When the motion of a subject is slow and the speed with which the camera is moved is too slow
(a nice background blur is not achieved)
•When the camera is not adequately tracking the motion of a subject
●
[E-Stabilization (Video)] is not available in the following cases.
•When using the Digital Zoom
•When [4K Live Cropping] is set