9. Using Menu Functions
220
[Pixel Refresh]
It will perform optimisation of imaging device and image
processing.
• Imaging device and image processing is optimised when
the camera is purchased. Use this function when bright
spots that do not exist in the subject get recorded.
• Turn the camera off and on after the pixels are corrected.
s
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have
affixed to the front of the imaging device is performed.
• Dust Reduction Function will operate automatically when
the camera is turned on, but you can use this function
when you see dust.
s
[Level Gauge Adjust.]
[Adjust.]:
Hold the camera in a horizontal position, and press
[MENU/SET]. The level gauge will be adjusted.
[Level Gauge Value Reset]:
Restores the default level gauge setting.
s
[Demo Mode]
You can try focusing, peaking, etc. in [Post Focus]
with the image picture.
s
[Format]
The card is formatted.
>
[Setup]
MENU