5. 4K Photo and Drive Settings
142
Taking Pictures While Adjusting a Setting
Automatically (Bracket Recording)
Applicable modes:
You can take multiple pictures while automatically adjusting a setting by pressing the
shutter button.
1
Select the menu.
2
Press
3
/
4
to select [More settings] and then press [MENU/SET].
• For information on [More settings], refer to the page that describes each function.
• Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture.
• When Exposure Bracket is selected, the bracket display flashes until all of the pictures
you have set are taken. If you change the bracket settings or turn off the camera before
all of the pictures you have set are taken, the camera restarts recording from the first
picture.
∫
To cancel [Bracket Type]
Select [OFF] in step
1
.
>
[Rec]
>
[Bracket]
>
[Bracket Type]
(Exposure Bracket)
Press the shutter button to perform recording while
adjusting the exposure.
(White Balance Bracket)
Press the shutter button once to take three pictures
with different white balance settings automatically.
MENU
