Panasonic LP-GS Series, Руководство по установке и обслуживанию

Страница: 23 / 190

23
Item
Model
LP-GS051 LP-GS051-L LP-GS052
Laser Marker NAVI smart display
language
English, German, Simplified Chinese, Traditional Chinese, Japanese, Korean
Required time for system startup Approx. 10 seconds
Required time for laser pumping Approx. 8 seconds to Max. 15 seconds
Power voltage
90V to 132V AC or 180V to 264V AC (including ±10% voltage fluctuations) *8
Frequency: 50/60Hz
Power
consumption
(Consumption
current) *9
100V AC 370VA or less (4.2A or less)
200V AC 500VA or less (2.8A or less)
Grounding method Direct earth for both the head and the controller
Cooling method Forced cooling for both the head and the controller
Operating ambient temperature *10 0°C to +40°C
Ambient temperature for storage *10 -10°C to +60°C
Operating ambient humidity *10 35 to 85%RH
Overvoltage category
Ⅱ
Pollution degree 2
Use location Indoor; at an altitude of 1000 m or below
Installation
direction
Head In all directions
Controller Vertically or horizontally
Weight
Head Approx. 11kg
Controller Approx. 8.0kg
Battery
(mounted in
product)
Type Manganese dioxide lithium primary battery
Model AFPX-BATT (CR-2450)
Quantity 1 piece
Weight Approx. 7.0g
*1: Average output power from the laser marker at delivery time with the maximum laser power setting.
*2: The work distance base position has approx. +/-0.5mm deviation per product.
*3: The value shown here is the configuration range that can be input. The setting values that can keep the quality of
marking or processing vary depending on the setting details and the target materials.
*4: VEC is a graphic file format dedicated for the laser marker. To use AI or EPS files, convert them to VEC format with the
attached software “ExportVEC”.
*5: Some of the languages or character types are not supported by this laser marker. Characters written from right to left
such as Arabic or Hebrew, characters based on ligature such as Indian languages cannot be input.
*6: OS versions of which Microsoft has ended support are excluded.
*7: The Bluetooth function is not available with the models ending with “-F”. For the Bluetooth specifications, refer to
“Connection type” (P.45).
*8: The power supply voltage switches automatically.
*9: The typical value of the inrush current at startup is as follows: (Duration time is 10ms or less.)
At 100V AC: 60A
At 200V AC: 120A
*10: Common to the controller and the head. No condensation or freezing shall be allowed. If there is a gap between the
stored temperature and operating temperature, make sure to have the product get used to the operating ambient
temperature gradually prior to use to prevent the dew condensation.
ME-LPGS-SM-8