Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 78 / 180

78
3-7 Command Description
Reference
• The laser marker sends a response data after setting/readout command is transmitted. Refer to “3-5-3 Communication
sequence” (P.72).
⿎ Command reception permission : MKM
Controls the reception permission (reception mode ON/OFF) for setting and readout of communication commands.
• Setting / Readout data of marking mode
STX MKM
Sub
command
[Command reception mode]
1-byte
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of marking mode
STX MKM R (Check sum) Delimiter
Name
Data
length
[byte]
Description Remarks
Command
reception mode
1
“0”: Reception mode ON
(Start command reception in
the marking ready OFF status)
“1”: Reception mode OFF
(Finish command reception
and resume the marking
ready ON status)
In the shutter open or marking ready ON status,
set “reception mode ON” when transmitting the
communication command including an action
to update the laser marker data. To resume the
ready ON status after command transmission,
set “reception mode OFF”.
Reference
• For details on command reception permission, refer to “3-2 Command Reception Condition” (P.62).
• Send MKM command with the shutter opened state. When DIP switch No. 2 is ON and the shutter is closed, the shutter
opens at the timing of “reception mode OFF” is set.
ME-LP400V-EX-6