Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 119 / 180

119
⿎ Arbitrary point radiation condition : PRF
Sets X/Y coordinate offset and laser power correction ratio, etc. for the specified arbitrary point radiation condition.
• Setting / Readout data of general condition
STX PRF
Sub
command
[Point radiation condition No.] [System reservation]
[X offset] [Y offset] [Laser power correction]
[Laser pulse cycle correction]
25-byte (LP-V series), 22-byte (LP-400/LP-W series)
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of processing condition
STX PRF R
[Point radiation condition No.]
2-byte
(Check
sum)
Delimiter
Name
Data length
[byte]
Description Remarks
Point radiation
condition No.
2 “00”–“15”
System
reservation
1 “0” fixed System reservation field.
X offset 8
Model type* Setting range [mm]
LP-V10 “-045.000”–“+045.000”
LP-4x0 “-055.000”–“+055.000”
LP-4x5/LP-V15 “-080.000”–“+080.000”
LP-4x1/LP-W “-027.500”–“+027.500”
Y offset 8
Laser power
correction
3 “000”–“200” [%]
• The correction ratio is calculated
using the value set at the laser
setting as 100%.
• With LP-400/LP-W series,
nothing should be input in Laser
Pulse Cycle Correction.
(Laser pulse cycle
correction)
(Only for LP-V
series)
(3) “050”–“200” [%]
* For the detail of the model type, refer to “Target laser marker” (P.8).
ME-LP400V-EX-6