background image

Battery System User Manual for Panasonic LJ-SK84A 

 

 

 

Grid Tied PV System 

 User Manual

 

Version 1.0 © solarcity 2016 UM-1059-PV-1.0

 

12 

 

8.0  SYSTEM ISSUES 

 

8.1 Troubleshooting 

 

Please consult the table below if you have concerns that the battery system is not operating normally.  

 

Problem 

Solution 

The battery stops discharging 

Either the battery is fully discharged or has reached 
the lower discharge limit set.  
At  very  low  or  high  temperatures  the  battery  may 
stop discharging early to protect the battery  

The battery stops charging 

The battery is fully charged.  
At  very  low  temperatures  the  battery  may  stop 
charging early to protect the battery. 

The Stand-alone power outlet does not work 

The  Stand-alone  power  outlet  can  only  be  used 
during a power cut.  Stand-alone operation needs to 
be activated manually.  
The  Stand-alone  outlet  RCD  might  have  tripped. 
Please contact solarcity. 

The battery does not work 

If timers have been set under menu item no -3, the 
battery  will  not  work  in  SELF    mode.  Make  sure  all 
timers are set to 00:00. 

The display shows an error  

Consult section 8.2 or contact solarcity 

 

8.2 Error codes 
 

Please consult the list below if the battery displays an error code. 

 

E010 

High grid voltage 

Normal operation will resume once conditions improve 

E020 

Low grid voltage 

Normal operation will resume once conditions improve 

E030 

AC over frequency 

Normal operation will resume once conditions improve 

E040 

AC under frequency 

Normal operation will resume once conditions improve 

E060 

Abnormal grid 

Normal operation will resume once conditions improve 

E070 

Instantaneous over voltage 

Normal operation will resume once conditions improve 

E080 

Instantaneous under voltage  

Normal operation will resume once conditions improve 

P620, P690 

Over discharged 

Normal operation will resume once conditions improve 

P660, P700 

High temperature 

Normal operation will resume once conditions improve 

H010 toH990 

The battery switched off to 
prevent serious damage and  
needs to be serviced.  

Contact solarcity immediately 

F010 to F990 

Battery failure! 
   

Contact solarcity as battery most likely needs  
replacement 

 
If you get any of the above error codes on a regular basis it is likely that there is an external issue.  
In this case, please contact solarcity so we can help to rectify any issues.   
 
 

9.0  WARRANTY 

 
For so customers we manage the  battery system and replace it when it reaches the end of its useful life as 
part of our energy service.   
 
If  you  have  purchased  the  battery  outright  please  refer  to  the  Panasonic  Warranty  on  page  30  of  the  separate 
Panasonic User Manual which can be downloaded here:  

http://www.solarcity.co.nz/assets/Uploads/productmanuals/LJ-SK56A-usermanual-20161028.pdf

  

 

Содержание LJ-SK56A















Отзывы: