5
MbN
: Select the desired cellular phone.
a
M
SELECT
N
n
Using a landline
1
MCN
CID
2
Press
MCN
to search from the most recent
call, or
MDN
to search from the oldest call.
3
To call back
Press
M
N
or
MZN
.
R
If you select an entry with
“
”
or
“
”
or
“
1
”
displayed, an error tone
sounds.
Wait for 2 seconds until confirmation
message is displayed. Press
M
YES
N
if
you want to call back.
To exit
Press
M
OFF
N
.
Note:
R
If the entry has already been viewed or
answered, “
” is displayed.
–
or
indicates the caller information
was received from the cellular line.
–
“
”
or
“
”
indicates the caller
information for blocked calls.
–
“
1
”
indicates the caller information for
one ring scam calls.
Editing a caller’s phone number
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
n
When a cellular phone is paired:
1
MCN
CID
2
MbN
: Select the desired entry.
a
M
SELECT
N
3
Press
*
(Edit) repeatedly until the
phone number is shown in the desired
format.
R
If you select an entry with
“
”
or
“
”
or
“
1
”
displayed:
M
MENU
N
a
M
EDIT
N
a
Edit the
number.
4
Using a cellular line:
To make a cellular call, continue from
step 4, “Viewing the caller list and
calling back”, page 53.
Using a landline:
M
N
n
When a cellular phone is not paired:
1
MCN
CID
2
MbN
: Select the desired entry.
a
M
MENU
N
3
MbN
:
“
Edit
”
a
M
SELECT
N
R
If you select an entry with
“
”
or
“
”
or
“
1
”
displayed:
M
MENU
N
a
M
EDIT
N
a
Edit the
number. Go to step 5.
4
Press
M
EDIT
N
repeatedly until the
phone number is shown in the desired
format.
5
M
N
Caller ID number auto edit feature
Once you call back an edited number, the unit
which was used to call back remembers the
area code and format of the edited number.
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
For example, you can use this feature to set
the unit to ignore the area code of callers in
your area, so that you can call these local
numbers using caller information without
dialing the area code.
To activate this feature, you must edit an entry
in the caller list, then call that number. After
that, phone numbers from that caller’s area
code are edited automatically.
This feature can be set for each unit
(page 46). The default setting is
“
On
”
.
Note:
R
Phone numbers from the 4 most recently
edited area codes are automatically edited.
54
For assistance, please visit http://shop.panasonic.com/support
Caller ID Service
TA Manual_TGD86x_0921.pdf 54
2020/09/21 16:00:01
