Connections
Connect the handset cord (
A
) to the handset and the unit. Connect the telephone
line cord until it clicks into the unit and telephone line jack (
B
). After line connection,
lift the handset to check for a dial tone.
DSL/ADSL filter*
To single-line telephone
jack (RJ11C)
1
2
R
Use only a Panasonic handset for KX-TS840.
R
Use only the supplied telephone line cord. Using another telephone line cord may
not allow the unit to work properly.
*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.
Initial setting
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service.
The default setting is TONE.
TONE: For tone dial service.
PULSE: For rotary/pulse dial service.
1
Lift the handset.
2
M
PROGRAM
N
R
Status indicator light will start
double flashing at an interval.
3
M
HOLD/MODE
N
®
M
3
N
4
To select TONE, press
M
1
N
.
or
To select PULSE, press
M
2
N
.
5
M
PROGRAM
N
R
A long beep sounds.
R
Status indicator light will turn OFF.
6
When finished, hang up.
For assistance, please visit http://www.panasonic.com/help
7
Preparation
