Panasonic KXTG8521E Скачать руководство пользователя

Страница: 50 / 60

Useful Information

Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message

Cause/solution

Base no power

No link to base.
Reconnect main
base AC adaptor.

The handset has lost communication with the base
unit. Move closer to the base unit and try again.

Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.

The handset’s registration may have been cancelled.
Re-register the handset (page 31).

Check Phone Line

The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 9).

Error

Recording was too short. Try again.

Failed

Phonebook copy failed (page 21). Confirm the other
handset (the receiver) is in standby mode and try
again.

Incomplete

The receiver’s phonebook memory is full. Erase the
unwanted phonebook entries from the other handset
(the receiver) and try again.

Invalid Number

You tried to send an SMS message to a phone number
saved in the phonebook, caller list, or redial list that is
over 20 digits long.

Memory Full

The phonebook memory is full. Erase unwanted
entries (page 20).

Message memory is full. Erase unwanted messages
(page 42, 43).

The call barred list memory is full. Erase unwanted
entries (page 30).

The maximum number of base units (4) is already
registered to the handset. Cancel unused base unit
registrations from the handset (page 32).

Use rechargeable
battery.

A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 7.

You must first
subscribe to
Caller ID.

You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.

TG8521E(e).book Page 50 Wednesday, March 17, 2010 3:39 PM

Содержание KXTG8521E





























































Результаты поиска

Содержание KXTG8521E

Отзывы:

Похожие инструкции для KXTG8521E

Бренды по названию

Популярные бренды

Panasonic KXTG8521E, Руководство по эксплуатации

Результаты поиска

Содержание KXTG8521E

Отзывы:

Похожие инструкции для KXTG8521E

Бренды по названию

Популярные бренды