Panasonic KXTG6841 Скачать руководство пользователя страница 52

Страница: 52 / 68

Error messages

Display message

Cause/solution

Base no power

No link. Re-connect base
AC adaptor.

No link.

The handset has lost communication with the base
unit. Move closer to the base unit and try again.

Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.

The handset’s registration may have been canceled.
Re-register the handset (page 35).

When

“

No link.

”

is displayed during a power

failure, place a handset on the base unit to supply
power to the base unit.

Busy

The called unit is in use.

Other units are in use and the system is busy. Try
again later.

The handset you are using is too far from the base
unit. Move closer and try again.

Call phone company for
your access #

You have not stored the voice mail access number.
Store the number (page 47).

Check tel line

The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 10).

Error!!

Recording was too short. Try again.

Invalid

There is no handset registered to the base unit
matching the handset number you entered.

The handset is not registered to the base unit.
Register the handset (page 35).

Requires subscription to
Caller ID.

You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.

Use rechargeable battery.

A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 5, 7.

For assistance, please visit http://www.panasonic.com/help

Useful Information

TG684x7x(en)_1127_ver021.pdf 52

2012/11/27 18:16:49

Содержание KXTG6841





































































Результаты поиска

Содержание KXTG6841

Отзывы:

Похожие инструкции для KXTG6841

Бренды по названию

Популярные бренды

Panasonic KXTG6841, Руководство по эксплуатации

Результаты поиска

Содержание KXTG6841

Отзывы:

Похожие инструкции для KXTG6841

Бренды по названию

Популярные бренды