Useful Information
37
Making/answering calls, intercom
*1 KX-TG2512/KX-TG2513
*2 KX-TG2521
Problem
Cause/solution
w
is flashing.
L
The handset is too far from the base unit.
Move closer.
L
The base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the
base unit.
L
The handset is not registered to the base unit.
Register it (page 40).
L
Activating one touch eco mode reduces the
range of the base unit in standby mode. If
required, turn eco mode off (page 14).
Noise is heard, sound cuts in
and out.
L
You are using the handset or base unit in an
area with high electrical interference. Re-
position the base unit and use the handset
away from sources of interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
L
Unplug the base unit’s AC adaptor to reset the
unit and turn off the handset. Reconnect the
adaptor, turn on the handset and try again.
The handset does not ring.
L
The ringer volume is turned off. Adjust ringer
volume (page 20).
I cannot make a call.
L
The dialling mode may be set incorrectly.
Change the setting (page 14).
L
The handset is too far from the base unit.
Move closer and try again.
L
Another unit is in use. Wait and try again
later.
*1
L
Answering system is being used.
*2
Wait and
try again later.
TG2511_21FX(e).book Page 37 Tuesday, February 2, 2010 3:08 PM