Panasonic KXTC1460B - CORDLESS 900 ANALOG Скачать руководство пользователя страница 11

– 3 –

FCC Information

If requested by the telephone company, inform them as follows:
FCC Registration No.  . . . . . . . . . . . . . . . (found on the bottom of the unit)
Ringer Equivalence  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1B
The particular telephone line to which the equipment is connected.

This unit must not be connected to a coin operated line.
If you are on a party line, check with your local telephone company.

Ringer Equivalence No. (REN):

The REN is useful in determining the quantity of devices you may connect
to your telephone line and still have all of those devices ring when your
telephone number is called. In most, but not all areas, the sum of the
REN’s of all devices connected to one line should not exceed five (5.0).
To be certain of the number of devices you may connect to your line, as
determined by the REN, you should contact your local telephone
company to determine the maximum REN for your calling area.

In the event terminal equipment causes harm to the telephone network,
the telephone company should notify the customer, if possible, that
service may be stopped.

However, where prior notice is impractical, the company may temporarily
cease service providing that they:

(a) Promptly notify the customer.
(b) Give the customer an opportunity to correct the problem with their

equipment.

(c) Inform the customer of the right to bring a complaint to the Federal

Communication Commission pursuant to procedures set out in FCC
Rules and Regulations Subpart E of Part 68.

The Telephone Company may make changes in its communications
facilities, equipment, operations or procedures, where such action is
reasonably required in the operation of its business and is not
inconsistent with the rules and regulations in FCC Part 68.

If such changes can be reasonably expected to render any customer
terminal equipment incompatible with telephone company
communications facilities, or require modification or alteration of such
terminal equipment, or otherwise materially affect its use or performance,
the customer shall be given adequate notice in writing, to allow the
customer an opportunity to maintain uninterrupted service.

PQQW12108ZA  01.11.13 1:06 PM  ページ 3

Содержание KXTC1460B - CORDLESS 900 ANALOG













Отзывы: