Panasonic KXMB2000E, Руководство по эксплуатации

Страница: 21 / 120

2.6 Adjusting the volume
(KX-MB2025/KX-MB2030 only)
Important:
R Before adjusting the volume, set the operation
mode to fax mode. If the
M Fax N light is OFF, turn
it ON by pressing M Fax N .
MCNMDN M Set N M Fax N
Ringer volume
While the unit is idle,
press MCN or MDN .
To turn the ringer OFF
Press MCN repeatedly to display “
RINGER OFF= OK?
” .
A M Set N
R The unit will not ring.
R To turn the ringer back ON, press MDN .
Monitor volume
While using the monitor,
press MCN or MDN .
2.7 Date and time
We recommend you to set the date and time. The other
party will receive your unit’s date and time as the header
information.
MFNMEN M Set N
M Menu N
M Fax N
1
M Menu N A MBNM 1 NM 0 NM 1 N A M Set N
2
Enter the current date/month/year by selecting 2
digits for each.
Example: 3 August, 2010
M 0 NM 3 N M 0 NM 8 N M 1 NM 0 N
3
Enter the current hour/minute by selecting 2 digits for
each.
Example: 10:15 PM (12 hour clock format)
1.
M 1 NM 0 N M 1 NM 5 N
2. Press MGN repeatedly to select “
PM
” .
Press MGN repeatedly to select “
AM
” or “
PM
” , or
24-hour time entry.
4
M Set N
5
Press M Menu N to exit.
Note:
R To check the current date and time setting, press
M Fax N to temporarily change the unit to the fax mode
(KX-MB2025/KX-MB2030 only).
R Your unit’s date and time will be used as the header
information for the following:
– When sending as an attached file to an email
destination directly from this unit (Scan to email
address) (page 31) (KX-MB2000/KX-MB2010/
KX-MB2030 only).
– When sending faxes (page 41) (KX-MB2025/
KX-MB2030 only).
R If the date and time is not set correctly, the other party
will receive an incorrect date and time as their
header. This may confuse the other party.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service
(KX-MB2025/KX-MB2030 only)
The date and time will be automatically set according to
the received caller information.
R If the time has not previously been set, Caller ID will
not adjust the clock.
21
2. Preparation