Panasonic KXF-1B4C Скачать руководство пользователя страница 46

Страница: 46 / 162

Page 32

Precautions for Handling Disks

M37E

OBSERVE THE FOLLOWING ITEMS WHEN HANDLING FLOPPY DISKS.

Floppy disks and the data in them can be destroyed.

CAUTION

Eject button
Do not press this button
while the access indicator
lamp is lit.

Access indicator lamp

Do not eject the disk or turn off the power supply while the disk drive access indicator
lamp is lit.

Direct sunshine

Dust

Case

Disk

High or low temperature

A disk should not be stored or left in
areas exposed to the following
conditions:

Do not apply excessive force to the disk.

Do not place heavy objects on the disk.

Automatic shutter

The automatic shutter should not be

opened. Do not touch the magnetic circu-

lar disk inside.

Refrain from smoking, drinking and

eating close to the disk.

Any loose labels should be re-
placed with new ones.

Do not place the disk in the
vicinity of a motor, CRT, or
anything that may generate a
magnetic field.

Do not attach a new label over an old one.

Do not bring a magnet close to the
disk.

High humidity

HANDLING FLOPPY DISK

Do not use the case that is not provided
for safekeeping and carrying.

1E4C-E-XXA00-A04-01

Содержание KXF-1B4C



































































































































































Результаты поиска

Содержание KXF-1B4C

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KXF-1B4C, Руководство по эксплуатации

Результаты поиска

Содержание KXF-1B4C

Отзывы:

Бренды по названию

Популярные бренды