Setting
Command
Value
Login password
passwd
Set the login password.
1.
Log in to the terminal emulator, enter "service
stop", and then press [Enter].
2.
Enter "passwd set XXXX", then press [Enter].
•
For XXXX, enter a string between 4–15
characters. Only ASCII code characters 0x20–
0x7e can be used.
•
When entering spaces or single quotation
marks ('), enclose the whole string in double
quotation marks (").
Example: "AAA BBB'CCC"
When entering double quotation marks ("),
enclose the whole string in single quotation
marks (').
Example: 'AAA"BBB'
•
Double quotation marks (") and single quotation
marks (') cannot be used in the same string.
3.
Enter "syssave", press [Enter], then turn the power
off and back on to restart the unit.
Note
•
For security purposes, change the default login
password the first time you install the unit.
Choose a password that cannot be easily
guessed by a third party.
•
Keep a record of your password to avoid
forgetting it. The password should be kept safe
to prevent unauthorised access.
Administrator menu
login password
guipasswd
Change the login password for the administrator menu
for when the system administrator has forgotten their
password.
1.
Log in to the terminal emulator, enter "service
stop", and then press [Enter].
2.
Enter "guipasswd set normal XXXXXXXX", then
press [Enter].
•
For XXXXXXXX, enter a string between 4–10
digits (default: 00000000).
3.
Enter "syssave", press [Enter], then turn the power
off and back on to restart the unit.
Installation Manual
39
6 Settings and Confirmation
Содержание KX-VC300CN
Страница 63: ...Installation Manual 63 Notes ...