Panasonic KX-VC300CN, Руководство пользователя, Страница: 104 / 142

5.
Press [G] .
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use [ ][ ] to select "Yes" and press [Enter] .
•
The admin menu screen is displayed.
7.
Press [Home] .
•
The Home screen is displayed.
Making H.323 Settings
Note
•
These settings can only be made when "H.
323" is set to "ON" on the call type settings
screen.
•
When connecting to an MCU by entering the
MCU’s conference room number@IP address,
"SIP Server" (Page 103) and "Gatekeeper"
must be set to "OFF" .
•
If video conference calls cannot be made
because there is a problem with the gatekeeper
and H.460 server, the H.323 settings are
incorrect (on the gatekeeper and the H.460
server, or on the unit), etc.,
"Not registered"
will be displayed on the Home screen instead of
the H.323 extension/H.323 name. In this case,
you cannot make calls using either IP
addresses or the gatekeeper and H.460 server.
Contact your network administrator.
1.
Login to the administrator menu (Page 101).
•
The admin menu screen is displayed.
2.
Press [ ] .
•
The second page is displayed.
3.
Use [ ][ ] to select "H.323 Settings" and press
[Enter] .
•
The H.323 settings screen is displayed.
4.
Use [ ][ ] to select the following items for input:
"Gatekeeper" : Use [ ][ ] to select "ON" or
"OFF" (default).
Note
•
This setting is available only when "ON" is
selected for "H.323" (Page 102) and
"OFF" is selected for "SIP
Server" (Page 103).
"Gatekeeper Address" : Enter the gatekeeper’s IP
address.
Note
•
If the IP address contains 1 or 2 digit
numbers, enter these numbers as they are.
Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
"H.323 Name" : Enter the H.323 name.
Alphanumeric characters and the symbols . = * + _
- $ ! ? / ' ( ) can be entered (up to 60 characters).
"H.323 Extension" : Enter the H.323 extension.
Numeric characters and the symbols # and * can be
entered (up to 20 characters).
Note
•
Enter a standards-compliant value. For
details, contact your network administrator.
"Authentication" : Use [ ][ ] to select whether
to enable authentication.
–
"ON" : Enables authentication.
–
"OFF" (default): Disables authentication.
104 User Manual
Contacts and Settings