manualshive.com logo in svg

Panasonic KX-VC1600, Руководство пользователя

Поделиться
Скачать
Panasonic KX-VC1600 Скачать руководство пользователя страница 187

Problem

Cause and Solution

I extended the service period,
but the Terminal ID is not
displayed on the Home
screen.

•

You did not restart the unit after registering on the KX-VC Series NAT
Traversal Service registration page. Restarting the unit is necessary to
apply the registration information.

→

Turn off power to the unit, and then turn it back on to restart the unit.

The service period has not
been extended even though a
service period extension was
performed.

•

You did not restart the unit after registering on the KX-VC Series NAT
Traversal Service registration page. Restarting the unit is necessary to
apply the registration information.

→

Turn off power to the unit, and then turn it back on to restart the unit.

If a message from the KX-VC Series NAT Traversal Service is
displayed

Message

Cause and Solution

Failed Registration Key code
authentication.

•

You are trying to register an invalid Registration Key.

→

Recheck the information of the Registration Key that was issued 
(Page 140), then repeat the registration (Page 133).

XXXXXXXX

Note

•

An error code 
(containing
alphanumeric
characters) is
displayed in
"XXXXXXXX".

•

The router or the LAN cable is not connected correctly to the unit, and
therefore you cannot make a video conference call. The following table
explains the error codes:

Error Code

Explanation

01000003

The DHCP lease expired.

10000001

Registration to the gate keeper failed.

01000006

There was a change due to an extension 
of the DHCP lease.

01000007

The DHCP network information is invalid.

Registration to the SIP server failed.

05000008

TCP connection was lost in NAT 
Traversal Mode.

05000009

→

Check that the router and/or LAN cable are correctly connected to the
unit. (Directly connect the router to the unit and check operation. Also
try replacing the LAN cable, and then check operation.) If the devices
are connected correctly, the router’s settings may be incorrect, or the
unit may be malfunctioning. Contact your dealer.

Note

•

When transmission between the unit and the router is interrupted
because the LAN cable is connected incorrectly, it may take up to
10 minutes before the Terminal ID is displayed and video
conference calls can be made after reconnecting the LAN cable.

Document Version  2015-08  

User Manual

187

Additional Information

Содержание KX-VC1600





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды