Panasonic KX-VC1000, Руководство пользователя

Страница: 126 / 228

Number of Sites Layout Number
22 CP21
23-24 CP24
"Main Position (Discussion)" : Press [ENTER]
and use [ ][ ] to select the display method for
the main position.
–
"Local Site" (default): Displays your own site.
–
"Voice Activation 1" : The site with the loudest
volume is automatically displayed as the main
display.
–
"Voice Activation 2 (Local Site)" : Your own
site’s image is displayed as the main display,
and the site with the loudest volume at the time
is displayed as display priority 2.
"Video switch time frame" : Use [ ][ ] to select
the time the screen’s display is fixed when the
display is controlled according to audio (1 to 20
seconds, default: 10 seconds).
"Site name display" : Use [ ][ ] to select
whether to display site names when the display is
split into multiple screens.
–
"ON" (default): Display site names.
–
"OFF" : Do not display site names.
Note
•
For images displayed using HDMI 1 at the
main site, you can display the name of each
site on the layout screen. Note, however,
that when using PwithP or SideBySide for
camera or content layout, the site name is
not displayed even when using HDMI 1
(Page 150).
•
When using presentation mode, site names
are displayed in the composite image of sub
sites.
"Local Camera Display of MCU Site" : Select
whether to display an image of the main site as the
composite image in discussion mode using
[ ]
[ ] .
–
"ON" (default): Displays the image of the main
site.
–
"OFF" : Does not display the image of the main
site.
"Camera control transmitting" : Use [ ][ ] to
select whether to allow Sub Sites to operate the
camera of main display site.
–
"ON" : Allow camera operation by Sub Sites.
–
"OFF" (default): Do not allow camera operation
by Sub Sites.
"DTMF for Content Sharing" : Use [ ][ ] to
select whether to allow Sub Sites to share contents
using remote control operations.
–
"ON" (default): Allow Sub Sites to perform
operations using the remote control.
–
"OFF" : Do not allow operations by Sub Sites
using the remote control.
Note
•
When "ON" is set, content sharing can be
controlled using the [PC] , [CAMERA
SUB] , and [CAMERA MAIN] buttons, as
well as the numeric keypad (*10: Start
sharing, *11: Stop sharing).
"DTMF layout change" : Use [ ][ ] to select
whether other parties can use remote control
operations to perform screen layout change
operations.
–
"ON" : Enable operations by Sub Sites using the
remote control.
–
"OFF" (default): Disable remote control
operations by Sub Sites.
"Auto move to CP1" : Use [ ][ ] to select
whether the function that switches the screen layout
to CP1 when content sharing is started is enabled
or not.
–
"ON" (default): Switching to CP1 is enabled.
–
"OFF" : Switching to CP1 is disabled.
"Other Site's Audio" : Press [ENTER] and use
[ ][ ] to select the mode to combine audio from
Main Site with the audio from the other site.
–
"Mix (Auto)" (default): Audio from the loudest
4 sites is automatically mixed together.
–
"Mute" : Mutes the audio of Sub Sites. Only the
audio of the Main Site is output.
"Display far site's Mute icon" : Use [ ][ ] to
select whether the Sub Site audio status icon is
displayed.
–
"ON" (default): The audio status icon is
displayed.
–
"OFF" : The audio status icon is not displayed.
"Display Presentation Mode icon" : Use [ ]
[ ] to select whether an icon is displayed to
indicate that the MCU mode is Presentation Mode.
–
"ON" (default): The presentation icon will be
displayed.
–
"OFF" : The presentation icon will not be
displayed.
"Secondary Bandwidth Selection" : Press
[ENTER] and use [ ][ ] to select two types of
communication group thresholds.
126 User Manual Document Version 2018-01
Contacts and Settings