Panasonic KX-UTG200, Руководство по установке, Страница: 65 / 412

Main Menu Item Sub Menu Item
Access
Level
*1
U A
Speed/Duplex ü
Embedded Web ü ü
Port Mirroring ü ü
HTTP Authentication ü
Provisioning ü
Multicast Paging ü ü
Application Settings — ü ü
Network Test — ü ü
Change Level — ü ü
Reset Exclude Private Settings ü ü
Exclude Network Settings ü ü
Restart —
ü ü
*1
The access levels are abbreviated as follows:
U: User; A: Administrator
A check mark indicates that the setting is available for that access level.
3.1.2 Direct Commands
The following table shows additional features programmable with direct commands. These commands are
hidden from end users.
Direct
Command
Feature Ref.
[#][1][3][6] Resetting the unit Page 37
[#][5][3][4] Embedded web Page 32
[#][5][9][0] Port Mirroring Page 66
[#][6][1][1] Disable the touch screen
*1
Page 66
[#][6][2][2] Export phone user interface settings
*2
Page 66
*1
Only available for the KX-UTG300.
*2 Only available for the KX-UTG300 when there is a connected USB flash drive.
Note
•
Key combinations for direct commands can be customized. See the following for more information.
–
Resetting the unit: DIR_CMD_FACTORY_RESET (Page 296)
–
Embedded web: DIR_CMD_ENABLE_EMBEDDED_WEB (Page 296)
–
Port Mirroring: DIR_CMD_ENABLE_PORT_MIRROR (Page 296)
–
Disable the touch screen: DIR_CMD_DISABLE_TOUCH_SCREEN (Page 296)
Document Version 2015-01 Administrator Guide 65
3.1.2 Direct Commands